Différences entre versions de « Mono-lens stereo beam splitter »

De 3Denlive
Sauter à la navigation Sauter à la recherche
(Created page with "#Aperture vs field diaphragm/mask *TOP: all the light rays coming from one point though the lens, supposed point A, is sent to a single point of the picture (when focused). *...")
 
Ligne 1 : Ligne 1 :
−
#Aperture vs field diaphragm/mask
+
=Aperture vs field diaphragm/mask=
  
 
*TOP: all the light rays coming from one point though the lens, supposed point A, is sent to a single point of the picture (when focused).
 
*TOP: all the light rays coming from one point though the lens, supposed point A, is sent to a single point of the picture (when focused).

Version du 16 avril 2021 à 08:29

Aperture vs field diaphragm/mask

  • TOP: all the light rays coming from one point though the lens, supposed point A, is sent to a single point of the picture (when focused).
  • MIDDLE: if you have a diaphragm/mask very very close to the lens (ideally inside the lens system), you are reducing the light rays, keeping the whole scene with less light. You have an aperture diaphragm/mask.
  • BOTTOM: if your diaphragm/mask is far from the lens (according to its size), you simply hide all the light of a part of the scene (suppose you are hiding all the light from point A), keeping the light of the other part of the scene (suppose point B). You have a field diaphragm/mask.

To be able to do stereo shots, you need your mirrors to act like 2 complementary field masks...

Lens.png

Diaphragm included in a lens system:

Diaphragm.png